diamond nectar vs floralicious

Diamond Nectar Vs Floralicious – Which One to Pick?

While hoping for the best lead, of course, you are worried about your fertilizer. 

Actually, it’s quite common to be in a hassle about which plant enhancer to use. Especially when it comes to the two most well-known fertilizers Diamond nectar and Floralicious. 

So, which one should you choose when it comes to Diamond nectar vs Floralicious?

In Diamond nectar vs Floralicious, Diamond nectar has higher levels of phosphate and potassium. Floracious has more humic acid. A lesser dosage of Floralicious is able to produce results identical to Diamond Nectar. It also has trace minerals which Diamond Nectar lacks. 

But, just this much information won’t do you any good. Well, rest assured, cause we have written a whole article about which one you should choose. 

Let’s start, shall we?

Quick Comparison

While selecting the right plant enhancer, it is mandatory to know about the key features. There might be a number of details but your yield ultimately depends on some base factors. 

Here we have tried to enlist them for you. 

CategoryDiamond NectarFloralicious
IngredientsAvailable Phosphate: 1%Soluble potash: 1%Humic Acid: .01%Available Phosphate: .8%Soluble potash: .02%Humic Acid: 2%Sea Kelp: 20%
DosageSeedling and Cutting: 1-2 ml per litreSoil Application: 3 ml per litreHydroponics: 1-2 ml per litreFoliar Spray: 50ml per litreAs Nutrient Additive: .25 ml per litreAs Foiler Spray: 1-2 ml per litre
Trace MineralsAbsentPresent
PriceCheck Latest PriceCheck Latest Price 

But again, these are just a brief summary. But don’t worry. We have elaborated on these factors as much as possible.

Before moving on to the next segment check out this graph for a comprehensive view.

Floracious has more humic acid

Now let’s move on to the details!

Detailed Comparison

Although Diamond nectar and Floracious are both quality plant enhancers, they still have a few differences. And these few differences might be the key to achieving that desired yield.

what is mineral chelation
Source: generalhydroponics.com

So let’s get right into it. 

Ingredients:

For all plant enhancers, phosphate, potassium, and humic acids are base components. 

The phosphate and potassium help to build the plant cells causing direct growth. 

On the other hand, humic acid helps with mineral chelation. 

Now, what is mineral chelation? 

Mineral chelation is a process where a plant absorbs minerals through its roots. And the better a plant enhancer can help with this process, the more yield there’ll be. 

In the Diamond Nectar, the level of available phosphate is 1%, and soluble potash is also 1%. These levels are higher than Floralicious. Because in Floralicious, the level of phosphate is .8% and the soluble potash is much lower(.02%). 

So, strictly in these two ingredients, the Diamond Nectar outweighs the Floralicious. 

Now, let’s talk about humic acid. While Diamond Nectar was high in the previous ingredients, this time the win goes to Floralicious. It has 2% humic acids in its formula. 

On the other hand, Diamond Nectar has only .01% of humic acid.

Thus, Floralicious is much more adept at helping the plant through the chelation process. It ultimately leads to greater yield. 

Another thing about Floralicious is it has sea kelp. Ever wondered what sea kelp does for plants?

Mainly, sea kelp promotes bloom and foliage, causes cell process optimization, and enlarges chloroplast in plants. It contains more than 70 micronutrients. Thus it acts as a good source of organic food for a plant. 

So which one should you buy? Based on ingredients only, we would suggest going for the Floralicious. The added humic acid and sea kelp should help your plants to grow faster and bigger. 

You can later add on the phosphate and potassium by using pk boosters. That is of course in the flowering stage. 

However, keep in mind that not all pk boosters are suitable for the flowering stage. To get the maximum yield with Floralicious  you need to use some specific pk boosters. Here are some pk boosters that I frequently use on my buds: 

Although you might provide your plant with everything it needs, don’t forget about the external factors. Like keeping the humidifier inside or outside the grow tent might just alternate your yield.

Winner: The winner in this category is Floralicious for its outstanding ingredient list.

Dosage:

The right amount dosage for a particular plant enhancer is really important for proper growth. So, whichever you want to choose, you have to apply it properly.

Also, before going into explanations, let’s clarify some things. Measurements are different for the recirculation and Drain waste program. 

So, what is a drain to waste? 

Drain to waste is a process where you ensure that 15-20% volume starts running off by watering the plant. It has to escape the growing medium and you have to get rid of it. But in a circulation system, it is collected and reused for feeding other plants. 

Now, what is a recirculation system in plants?

A recirculating hydroponic system is in which water is recaptured and reused continuously. Throughout this process, various nutrients are injected into the water. Waste of water and resources can be reduced in this process. 

So in these two different methods, different amounts of dose are needed. Let’s begin.

Diamond nectar:

Before going to method-based analysis, here are some generalized measurements of Diamond Nectar:

Process  AmountTip
Seeding and Cutting Application1-2 ml per litreUse in diluted nutrient solution and water
Hydroponic1-2 ml per litreAfter each nutrient change, replace it.
Soil application3 ml per litreApply with every fertilizer application
Foliar Spray Application50 ml per litreCombine with nutrients.Every 7-14 days, spray both sides of the foliage

Now let’s dive right into our method-based measurements:

ProcessRecirculating ProgramDrain to Waste program
Seedling        5 ml        5 ml
Mild Growth        10 ml        10 ml
Growth        10 ml        10 ml
Aggressive Growth        10 ml        10 ml
Transition        5 ml        5 ml
Bloom        0 ml        0 ml
Aggressive Bloom        0 ml        0 ml
Ripen        0 ml        0 ml

That’s all about the Diamond Nectar dosage.

Floralicious:

Again let’s start off with a general analysis of the Floralicious dosage:

Process  AmountTip
Nutrient Additive0.25 ml per litreAfter every nutrient change, renew it. Also, keep your solution aerated.
Foiler Spray1-2 ml per litreSpray foliage gently and especially spray it lightly on the bottom part of the leaves.

And for our method-based measurements:

ProcessRecirculating ProgramDrain to Waste program
Seedling        0 ml        0 ml
Mild Growth        1 ml        1 ml
Growth        1 ml        1 ml
Aggressive Growth        1 ml        1 ml
Transition        1 ml        1 ml
Bloom        1 ml        1 ml
Aggressive Bloom        1 ml        1 ml
Ripen        0 ml        0 ml

So, you can see that we can produce the same yield by applying lesser Floracious than Diamond Nectar. That’s why we would suggest you go for it.

recirculating hydroponic system
Source: sphomegrower.com

While you apply these doses, we are sure that you have considered thinking of octopots or auto pots. This will help to increase your yield dramatically.

Winner: For using less amount of product Floralicious wins in the dosage category. 

Trace Minerals:

Another important fact concerning your plant’s growth are trace minerals. So what do trace minerals do in plants?

Mainly trace minerals provide necessary elements for various proteins, hormones, and other bodily processes of plants. Although plants need these minerals in very small quantities, they are very important for the plant’s growth. 

And amongst our two competitors, Floralicious is capable of providing plants with these minerals. But Diamond Nectar is not. Thus Floralicious is preferred by most people.

what do trace minerals do in plants
Source: veristrat.com

However, not to worry just yet if you’re a Diamond Nectar user. You can increase the number of trace minerals in your plant with the addition of compost. 

When my buds need an extra boost of trace minerals I add organic composts. With all the available compost on the market, it’s easy to get confused. Here are some of my go-to compost for buds:

By using these composts the number of trace minerals in your plants will rise. 

Winner: Because of added trace minerals found in Floralicious, it wins in this category. 

Price:

With all the added benefits that Floralicious has to offer, it comes at a bigger budget too. Honestly speaking both Diamond Nectar and Floralicious are really good products

Here are the detailed price specifications:

For Floralicious:

SizePrice
1 gallon155$-170$
1 quart40$-52$
16 Oz27$-33$
8 Oz18$-24$

For Diamond Nectar:

SizePrice
6 gallon184$-190$
2.5 gallons93$-100$
1 gallon40$-45$
1 quart18$-23$

So unless you are a perfectionist you might purchase Diamond nectar because of it’s the lower price.

Winner: For its lower price point, Diamond Nectar wins in this category. 

Final Verdict: Which Fertilizer to Go For?

By now it should be clear to you that the advantages of Floralicious far outweigh that of Diamond Nectar. Aside from the price of course. So, unless you have a money issue, you might go for the Floralicious. 

Floralicious provides a lot of humic acid and trace minerals for your plant. Also, the dosage is quite less. So the price becomes quite similar in the long run.

But if you are looking for a cheap but result-producing product, go for Diamond nectar.

Frequently Asked Questions (FAQs)

What is hydroponic?

Hydroponic is the process of cultivating plants without using soil. It’s an alternative to our general approach. In this process, plants are planted in inert growing media. They are provided with high nutrient solutions, oxygen, and water. This form of plantation has the potential to bring forth the best possible outcome.

What should be the temperature for plant nutrient solution?

The optimum temperature for a nutrient solution is  60° F and 75° F. Within this range, plants like alstroemeria, strawberries, and lettuce like it near the lower end. While, tomatoes, cannabis, and cucumbers like it near the higher end. 

Why should I flush my plants?

You should flush your plants because it contributes to eradicating and burning the built-up salts and nutrients while growing. Sometimes, we mistakenly feed the plant too much. It might cause a nutrient burn. A flush helps prevent this so that your plant can keep on growing safely.

End Note

I hope you were able to get all the information about Diamond Nectar vs Floralicious.

Here’s a reward for you for sticking with us till the end. While planting, always be extra careful to prevent root rot problems.

Until next time happy growing!

Leave a Comment

Your email address will not be published.

Scroll to Top